Gaint series LED Stadium light

Short Description:

> Imported OSRAM/LUMILEDS light source, high brightness, low light decay, long life
> Driven by international first-line brands, it has over-temperature protection, high conversion efficiency, high power factor and high defense
> Using ADC12 die-casting, it has high thermal conductivity, so that the heat can be quickly exported outside the body and balance the lamp body
> External temperature, reduce the temperature difference, reduce the junction temperature of the light source, reduce the light loss of the light source
> Using optical PC lens, IK08 anti-collision grade, anti-UV, transmittance of 94%, professional optical light distribution: 10°, 25°, 45°, 60°, 90°, single bias 60°,
> Install the support
> Protection level up to IP66.
>Port, wharf, tower crane, golf course, football field and other stadium lighting

 


Product Detail

Product Tags

DIMENSION:(mm/in)

Gaint series LED (3)

Technical Specification

- Input Voltage : 100-277VAC
- Driver Type :SAA CE
- Luminous Efficacy :130-160lm/w
- Colour Rendering Index : > 80Ra
- LED Type : LM80 SMD LED
- Operating : Temperature:-30°C up to 50°C

- Color Temperature : 3000K/4000K/5000K/5700K
- Material : Die-cast Aluminum body & Polycarbonate
Diffuser/Toughened glass
- Ingress Protection : IP66
- Impact Rating : IK08
- Rated Life : 50,000 hours
- Warranty : 5 years

Gaint series LED (4)

Luminaire Photometric

Gaint series LED (6)
Gaint series LED (1)

Packaging

Gaint series LED Stadium1

Installation(Optional)

Gaint series LED (2)

Announcements:
1.Please check the wire is good before connecting the wire
2.Please check if you shut the power before connecting
3.Please connect the wire with right color show in the sketch map
4.After connected to the power cable,make sure the cable joint position and wire of lamp must be waterproof processing,
5.It's nomal phenomenon,there is temperature rise on the products surface when use.
6.Please kindly read the introduction carefully to avoid the accident and damage. Just can be repaired and cleared after cutting off power.
7.Must be installed by qualified electrician. The connection way must be suitable for IEEE electrical standard or national standard.
8.Please kindly use soft cloth to clear it regularly (annually) to maintain the brightness.
9.It should be stocked in the shady, dry and clear environment and the stocked temperature is -30℃ to 50℃.


  • Previous:
  • Next:

  • Write your message here and send it to us