BATON Series LED Stadium light

Short Description:

> Proprietary mold, separate modular design, die-cast aluminum housing,
> The front without screws design, the appearance is stylish and simple.
> Luminous efficiency up to 150lm/w
> This series has 6 specifications, power :30-320W
> Professional anti-glare full cut-off light distribution: Luminous Angle 15°/30°/60°/90°/120°T2M/T3M/T4/T5 polarized light /30*90 polarized light optional.
> The pure aluminum heat dissipation area is large, the heat dissipation effect is good, and the lamp has a long service life.
> Protection level up to IP66.
>0/1-10V dimming, time control, photosensitivity, Internet of Things control and other functions are optional

 

 


Product Detail

Product Tags

DIMENSION:(mm/in)

TITAN series  LED Stadium

Technical Specification

- Input Voltage : 100-277VAC
- Driver Type : UL Approved Flicker-free
- Luminous Efficacy :130-170lm/w
- Colour Rendering Index : > 80Ra
- LED Type : LM80 SMD LED
- Operating : Temperature:-30°C up to 50°C

- Color Temperature : 3000K/4000K/5000K/5700K
- Material : Die-cast Aluminum body & Polycarbonate
Diffuser/Toughened glass
- Ingress Protection : IP66
- Impact Rating : IK08
- Rated Life : 50,000 hours
- Warranty : 5 years

TITAN series  LED Stadium light (7)

Luminaire Photometric

TITAN series  LED Stadium light (3)
TITAN series  LED Stadium light (5)

Packaging

BATON Series LED (3)
BATON Series LED (2)

Installation(Optional)

TITAN series  LED Stadium light (4)

Announcements:

1.Please check the wire is good before connecting the wire
2.Please check if you shut the power before connecting
3.Please connect the wire with right color show in the sketch map
4.After connected to the power cable,make sure the cable joint position and wire of lamp must be waterproof processing,
5.It's nomal phenomenon,there is temperature rise on the products surface when use.
6.Please kindly read the introduction carefully to avoid the accident and damage. Just can be repaired and cleared after cutting off power.
7.Must be installed by qualified electrician. The connection way must be suitable for IEEE electrical standard or national standard.
8.Please kindly use soft cloth to clear it regularly (annually) to maintain the brightness.
9.It should be stocked in the shady, dry and clear environment and the stocked temperature is -30℃ to 50℃.


  • Previous:
  • Next:

  • Write your message here and send it to us