Ares Series LED Floodlight 30W~320W

Short Description:

> Ares Patented private mold, integrated die-cast aluminum shell, stylish and simple appearance.
> High luminous efficiency up to 160lm/w
> This series of products has 6 specifications, power: 30-320W
> Professional anti-glare full cut-off light distribution: luminous Angle 15°/30°/60°/90°/120° T2M/T3M/50*120 polarized light /30*90 polarized light is optional.
> Large heat dissipation area, good heat dissipation effect, long service life of lamps. High temperature tempered glass, surface paint process, excellent corrosion resistance.
The protection level reaches IP67.
>0/1-10V dimming, time control, light sensing, iot control and other functions are optional.

 


Product Detail

Product Tags

DIMENSION:(mm/in)

Data sheet of Ares (5)
Data sheet of Ares (1)

Technical Specification

- Input Voltage : 100-277VAC
- Driver Type : CE SAA Approved Flicker-free
- Luminous Efficacy :130-160lm/w
- Colour Rendering Index : > 80Ra
- LED Type : LM80 SMD LED
- Operating : Temperature:-30°C up to 50°C

- Color Temperature : 3000K/4000K/5000K/5700K
- Material : Die-cast Aluminum body & Polycarbonate Diffuser/Toughened glass
- Ingress Protection : IP66
- Impact Rating : IK08
- Rated Life : 50,000 hours
- Warranty : 5 years

Data sheet of Ares (2)
Data sheet of Ares (8)
Data sheet of Ares (6)

Luminaire Photometric

Data sheet of Ares (7)

Packaging

Data sheet of Ares (4)

Installation(Optional)

Data sheet of Ares (3)

Announcements:

1.Please check the wire is good before connecting the wire

2.Please check if you shut the power before connecting

3.Please connect the wire with right color show in the sketch map

4.After connected to the power cable,make sure the cable joint position and wire of lamp must be waterproof processing.

5.It's nomal phenomenon,there is temperature rise on the products surface when use.

6.Please kindly read the introduction carefully to avoid the accident and damage. Just can be repaired and cleared after cutting off power.

7.Must be installed by qualified electrician. The connection way must be suitable for IEEE electrical standard or national standard.

8.Please kindly use soft cloth to clear it regularly (annually) to maintain the brightness. 9.It should be stocked in the shady, dry and clear environment and the stocked temperature is -30℃ to 50℃

 


  • Previous:
  • Next:

  • Write your message here and send it to us